Skip to content. | Skip to navigation

Revised Template for Consumer Water Heaters, v5.1

Revised Template for Consumer Water Heaters, v5.1

Revised Template for Consumer Water Heaters, v5.1

A revised template for Consumer Water Heaters, v5.1, has been posted on the CCMS web site.  This template must be used no later than August 29, 2017.  The template was revised to allow entries that are greater than 100% for Recovery Efficiency.

 

In addition, per 16 CFR 305.8(a)(5), after September 15, 2017, manufacturers must begin submitting a Web site address for the EnergyGuide label for covered models. This label information must be submitted either at the time the model is certified to DOE pursuant to 10 CFR part 429 or at some time on or before the annual report date immediately following such certification. This may be, but is not required to be, via CCMS and this new version includes a column where the Web site address may be entered.

 

If you have any questions about completing theses new templates, please contact us.

 

Download these templates from the CCMS Template page.

 

Posted 8/22/2017.