Please note: The Compliance Certification Database houses information submitted by importers and U.S. manufacturers of covered products and equipment subject to those standards. The appearance of a model on this web site is not an indication that DOE has determined that the model is compliant with DOE energy conservation standards. Each importer must submit a valid certification report for each model it imports, even if the model already appears on this web site. Link to Full Disclosure
This web site is updated approximately every two weeks.
*Note: The models listed below were certified as tested using a test procedure that is effective through December 31, 2022 and certified as meeting current standards. These models can be compared directly to other models listed below, but should not be compared to models listed under “Air Conditioners and Heat Pumps - Central, Appendix M1” in this database. The models listed under “Air Conditioners and Heat Pumps - Central, Appendix M1” are certified as meeting standards that go into effect on January 1, 2023.
You can click on the "Cost" button in the Energy Cost Estimate column below to see an estimate of the energy cost to run that model for a year. These energy cost estimates can help you compare different models. Your actual costs will depend on your utility rates and use. These costs are estimates based on typical use and national rates.
Brand Name(s)
Product Group Code Description
Outdoor Unit or Package Unit Individual Model Number
Indoor Unit Individual Model Number
Air Mover (Blower) or Indoor Unit if Fan is Part of Indoor Unit Individual Model Number
Cooling Capacity (Btu/h)
Heating Capacity (Btu/h)
Seasonal Energy Efficiency Ratio (SEER) in Btu/W-h
Note:
Heating Seasonal Performance Factor (HSPF) in Btu/W-h
Average Off Mode Power Consumption (Watts)
Energy Efficiency Ratio (EER) in Btu/W-h
Is the Efficiency Based on a System Tested without an Air Mover (i.e., Coil-Only System) or a System Tested with an Air Mover, such as a Furnace (i.e., a Blower-Coil System)?